Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-38
View
User view
Parameter
None
Description
Use the reset radius statistics command to clear the statistic information related to
the RADIUS protocol.
Related command: display radius.
Example
# Clear the RADIUS protocol statistics.
<3Com> reset radius statistics
1.2.18 reset stop-accounting-buffer
Syntax
reset stop-accounting-buffer { radius-scheme radius-scheme-name | session-id
session-id | time-range start-time stop-time | user-name user-name }
View
System view
Parameter
radius-scheme radius-scheme-name: Clears the buffered stop-accounting requests
related to the RADIUS scheme specified by radius-scheme-name, a character string
not exceeding 32 characters and excluding “/”, “:”, “*”, “?”, “<” and “>”.
session-id session-id: Clears the buffered stop-accounting requests related to the
session ID specified by session-id, a character string not exceeding 50 characters.
time-range start-time stop-time: Clears the buffered stop-accounting requests by the
time range of requests. The time range is specified by start-time and stop-time in the
format of hh:mm:ss-mm/dd/yyyy or hh:mm:ss-yyyy/mm/dd, that is,
hours:minutes:seconds-months/days/years or
hours:minutes:seconds-years/months/days.
user-name user-name : Clears the buffered stop-accounting requests by user ID, or
user name excluding the domain name. This user name comprises up to 55 characters,
excluding forward slashes (/), colons (:), asterisks (*), question marks (?), less-than
signs (<), and greater-than signs (>).