Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-39
Description
Use the reset stop-accounting-buffer command to clear the buffered
stop-accounting requests that have no responses.
If receiving no response after sending a stop-accounting request to a RADIUS server,
the router buffers the request packet and retransmits it. The number of allowed
transmission attempts can be set using the retry stop-accounting command.
You can clear the buffered stop-accounting requests by RADIUS scheme, session ID,
username, or time range.
Related command: stop-accounting-buffer enable, retry stop-accounting, and
display stop-accounting-buffer.
Example
# Clear the buffered stop-accounting requests related to the user
“[e-mail]”.
<3Com> reset stop-accounting-buffer user-name [e-mail]
# Clear the buffered stop-accounting requests in the time range 0:0:0 to 23:59:59 on
August 31, 2002.
<3Com> reset stop-accounting-buffer time-range 0:0:0-08/31/2002
23:59:59-08/31/2002
1.2.19 retry
Syntax
retry retry-times
undo retry
View
RADIUS view
Parameter
retry-times: The maximum number of request attempts, which is ranging from 1 to 20
and defaults to 3.
Description
Use the retry command to configure the number of RADIUS request attempts.
Use the undo retry command to restore the default.
In the RADIUS protocol, UDP applies to provide unreliable transmission. If the NAS
receives no response from the current RADIUS server when the response timeout
timer expires, it has to retransmit the RADIUS request.