Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 3000 Router Series
1051105210531054105510561057105810591060
3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-42
1.2.22 secondary accounting
Syntax
secondary accounting ip-address [ port-number ]
undo secondary accounting
View
RADIUS view
Parameter
ip-address: IP address, in dotted decimal format. By default, the IP address of
secondary accounting server is at 0.0.0.0.
port-number: Specifies the UDP port number, ranging from 1 to 65535. By default, the
accounting service is provided through UDP 1813.
Description
Use the secondary accounting command to configure the IP address and port
number for the secondary RADIUS accounting server.
Use the undo secondary accounting command to restore the IP address and port
number to the defaults.
For detailed information, refer to the description of the primary accounting command.
Related command: key, radius scheme, and state.
Example
# Set the IP address of the secondary accounting server of RADIUS scheme, huawei,
to 10.110.1.1 and the UDP port 1813 to provide RADIUS accounting service.
[3Com-radius-huawei] secondary accounting 10.110.1.1 1813
1.2.23 secondary authentication
Syntax
secondary authentication ip-address [ port-number ]
undo secondary authentication
View
RADIUS view
Parameter
ip-address: IP address in dotted decimal format. By default, the IP address of the
secondary authentication/authorization server is 0.0.0.0.