Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-45
[3Com-radius-huawei] state secondary authentication active
1.2.26 stop-accounting-buffer enable
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
View
RADIUS view
Parameter
None
Description
Use the stop-accounting-buffer enable command to enable the router to buffer the
stop-accounting requests that have no responses.
Use the undo stop-accounting-buffer enable command to disable the router to buffer
the stop-accounting requests that have no responses.
By default, the router is enabled to buffer the stop-accounting requests that have no
responses.
Since the stop-accounting packet affects the charge to a user, it has importance for
both users and ISPs. Therefore, the NAS makes its best effort to send every
stop-accounting request to RADIUS accounting servers. If receiving no response after
a specified period of time, the NAS buffers and resends the packet until receiving a
response or discards the packet when the number of transmission retries reaches the
configured limit.
Related command: reset stop-accounting-buffer, radius scheme, display
stop-accounting-buffer.
Example
# In the RADIUS scheme “Huawei”, enable the router to buffer the stop-accounting
requests that have no responses.
[3Com-radius-huawei] stop-accounting-buffer enable
1.2.27 timer quiet
Syntax
timer quiet minutes
undo timer quiet