Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-46
View
RADIUS view
Parameter
minutes: Ranges from 1 to 255. By default, the primary server must wait five minutes
before it can resume the active state.
Description
Use the timer quiet command to set the duration that the primary server must wait
before it can resume the active state.
Use the undo timer quiet command to restore the default (five minutes).
Related command: display radius.
Example
# Set the quiet timer for the primary server to ten minutes.
[3Com] radius scheme test1
[3Com-hwtacacs-test1] timer quiet 10
1.2.28 timer realtime-accounting
Syntax
timer realtime-accounting minutes
undo timer realtime-accounting
View
RADIUS view
Parameter
minutes: Real-time accounting interval, which is a multiple of 3 in the range 3 to 60
minutes and defaults to 12.
Description
Use the timer realtime-accounting command to configure a real-time accounting
interval.
Use the undo timer realtime-accounting command to restore the default interval.
The setting of real-time accounting interval is indispensable to real-time accounting.
After an interval value is set, the NAS transmits the accounting information of online
users to the RADIUS accounting server at intervals of this value.
The setting of real-time accounting interval somewhat depends on the performance of
the NAS and the RADIUS server: a shorter interval requires higher device performance.