Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-47
You are therefore recommended to adopt a longer interval when there are a large
number of users (more than 1000, inclusive). The following table recommends the ratio
of minutes to the number of users.
Table 1-6 Recommended ratio of minutes to the number of users
Number of users
Real-time accounting interval
(minute)
1 – 99 3
100 – 499 6
500 – 999 12
≥1000 ≥15
Related command: retry realtime-accounting and radius scheme.
Example
# Set the real-time accounting interval in the RADIUS scheme “huawei” to 51 minutes.
[3Com-radius-huawei] timer realtime-accounting 51
1.2.29 timer response-timeout
Syntax
timer response-timeout seconds
undo timer response-timeout
View
RADIUS view
Parameter
seconds: RADIUS server response timeout timer, ranging from 1 to 10 seconds. By
default, the value is 3.
Description
Use the timer response-timeout command to configure the RADIUS server response
timer.
Use the undo timer response-timeout command to restore the default.
If the NAS receives no response from the RADIUS server after sending a RADIUS
request (authentication/authorization or accounting request) for a period, the NAS
resends the request, thus ensuring the user can obtain the RADIUS service. You can
specify this period by setting the RADIUS server response timeout timer, taking into
consideration the network condition and the desired system performance.