Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-48
Related command: radius scheme and retry.
Example
# Set the response timeout timer in the RADIUS scheme huawei to 5 seconds.
[3Com-radius-huawei] timer response-timeout 5
1.2.30 user-name-format
Syntax
user-name-format { with-domain | without-domain }
View
RADIUS view
Parameter
with-domain: Includes the ISP domain name in the username sent to the RADIUS
server.
without-domain: Excludes the ISP domain name from the username sent to the
RADIUS server.
Description
Use the user-name-format command to configure the format of the username to be
sent to a RADIUS server.
By default, ISP domain name is included in the username.
The supplicants are generally named in the userid@isp-name format, of which
isp-name is used by the router to decide the ISP domain to which a supplicant belongs.
Some earlier RADIUS servers however, cannot recognize usernames including an ISP
domain name. Before sending a username including a domain name to such a RADIUS
server, the router must remove the domain name. This command is thus provided for
you to decide whether to include a domain name in a username to be sent to a RADIUS
server.
 Note:
If a RADIUS scheme defines that the username is sent without the ISP domain name,
do not apply the RADIUS scheme to more than one ISP domains, thus avoiding the
confused situation where the RADIUS server regards two users in different ISP
domains but with the same userid as one.
Related command: radius scheme.