Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-49
Example
# Send the username without the domain name to the RADIUS servers in the RADIUS
scheme "huawei".
[3Com-radius-huawei] user-name-format without-domain
1.3 HWTACACS Configuration Commands
1.3.1 data-flow-format
Syntax
data-flow-format data [ byte | giga-byte | kilo-byte | mega-byte ]
data-flow-format packet [ giga-packet | kilo-packet | mega-packet | one-packet ]
undo data-flow-format [ data | packet ]
View
HWTACACS view
Parameter
data: Sets data unit.
byte: Sets 'byte' as the unit of data flow.
giga-byte: Sets 'giga-byte' as the unit of data flow.
kilo-byte: Sets 'kilo-byte' as the unit of data flow.
mega-byte: Sets 'mega-byte' as the unit of data flow.
packet: Sets data packet unit.
giga-packet: Sets 'giga-packet' as the unit of packet flow.
kilo-packet: Sets 'kilo-packet' as the unit of packet flow.
mega-packet: Sets 'mega-packet' as the unit of packet flow.
one-packet: Sets 'one-packet' as the unit of packet flow.
Description
Use the data-flow-format command to configure the unit of data flows sent to the
TACACS server.
Use the undo data-flow-format command to restore the default.
By default, the data unit is byte and the data packet unit is one-packet.
Related command: display hwtacacs.