Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-50
Example
# Set the unit of data flow destined for the HWTACACS server "huawei" to be kilo-byte
and the data packet unit be kilo-packet.
[3Com-hwtacacs-huawei] data-flow-format data kilo-byte packet kilo-packet
1.3.2 debugging hwtacacs
Syntax
debugging hwtacacs { all | error | event | message | receive-packet | send-packet }
undo debugging hwtacacs { all | error | event | message | receive-packet |
send-packet }
View
User view
Parameter
all: Specifies all HWTACACS debugging.
error: Specifies error debugging.
event: Specifies event debugging.
message: Specifies message debugging.
receive-packet: Specifies incoming packet debugging.
send-packet: Specifies outgoing packet debugging.
Description
Use the debugging hwtacacs command to enable HWTACACS debugging.
Use the undo debugging hwtacacs command to disable HWTACACS debugging.
By default, HWTACACS debugging is disabled.
Example
# Enable the event debugging of HWTACACS.
<3Com> debugging hwtacacs event
1.3.3 display hwtacacs
Syntax
display hwtacacs [ hwtacacs-scheme-name [ statistics ] ]
View
Any view