Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-51
Parameter
hwtacacs-scheme-name: HWTACACS scheme name, a string of 1 to 32
case-insensitive characters, excluding forward slashes (/), colons (:), asterisks (*),
question marks (?), less-than signs (<), and greater-than signs (>). If no HWTACACS
scheme is specified, the system displays the configuration of all HWTACACS schemes.
statistics: Displays complete statistics about the HWTACACS server.
Description
Use the display hwtacacs command to view configuration information of specified or
all HWTACACS schemes.
By default, configuration information of all HWTACACS schemes is displayed.
Related command: hwtacacs scheme.
Example
# View configuration information of HWTACACS scheme gy.
<3Com> display hwtacacs gy
--------------------------------------------------------------------
HWTACACS-server template name : gy
Primary-authentication-server : 172.31.1.11:49
Primary-authorization-server : 172.31.1.11:49
Primary-accounting-server : 172.31.1.11:49
Secondary-authentication-server : 0.0.0.0:0
Secondary-authorization-server : 0.0.0.0:0
Secondary-accounting-server : 0.0.0.0:0
Current-authentication-server : 172.31.1.11:49
Current-authorization-server : 172.31.1.11:49
Current-accounting-server : 172.31.1.11:49
Source-IP-address : 0.0.0.0
key authentication : 790131
key authorization : 790131
key accounting : 790131
Quiet-interval(min) : 5
Response-timeout-Interval(sec) : 5
Domain-included : No
Traffic-unit : B
Packet traffic-unit : one-packet
Table 1-7 Description on the fields of the display radius statistics command
Field Description
HWTACACS-server template name HWTACACS scheme