Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-53
1.3.4 display stop-accounting-buffer
Syntax
display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name
View
Any view
Parameter
hwtacacs-scheme hwtacacs-scheme-name: Displays information on buffered
stop-accounting requests related to the HWTACACS scheme specified by
hwtacacs-scheme-name, a character string not exceeding 32 characters and excluding
“/”, “:”, “*”, “?”, “<” and “>”.
Description
Use the display stop-accounting-buffer command to view information on the
stop-accounting requests buffered in the router.
The router buffers and retransmits each stop-accounting request packet for which no
response is received from the RADIUS server. You may set the total number of
transmissions by using the retry stop-accounting command. Related command:
reset stop-accounting-buffer, stop-accounting-buffer enable, and retry
stop-accounting.
Example
# Display information on the buffered stop-accounting requests related to the
HWTACACS scheme “huawei".
<3Com> display stop-accounting-buffer hwtacacs-scheme huawei
-------------------------------------------------------------
NO. SendTime IP Address Template
1 10 172.31.1.27 huawei
-------------------------------------------------------------
Whole accounting stop packet to resend:1
Table 1-8 Description on the fields of the display stop-accounting-buffer command
Field Description
NO.
Sequence number of the
stop-accounting request
SendTime
Count of stop-accounting request
transmission attempts
IP Address IP address of the TACACS server