Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-58
1.3.10 primary accounting
Syntax
primary accounting ip-address [ port ]
undo primary accounting
View
HWTACACS view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal format.
port: Port number of the server, which is in the range 1 to 65535 and defaults to 49.
Description
Use the primary accounting command to configure a primary TACACS accounting
server.
Use the undo primary accounting command to delete the configured primary
TACACS accounting server.
By default, IP address of TACACS accounting server is all zeros.
You are not allowed to assign the same IP address to both primary and secondary
accounting servers.
You can configure only one primary accounting server in a HWTACACS scheme. If you
repeatedly use this command, the latest configuration replaces the previous one.
You can remove an accounting server only when it is not being used by any active TCP
connections, and the removal impacts only packets forwarded afterwards.
Example
# Configure a primary accounting server.
[3Com] hwtacacs scheme test1
[3Com-hwtacacs-test1] primary accouting 10.163.155.12 49
1.3.11 primary authentication
Syntax
primary authentication ip-address [ port ]
undo primary authentication
View
HWTACACS view