Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-59
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal format.
port: Port number of the server, which is in the range 1 to 65535 and defaults to 49.
Description
Use the primary authentication command to configure a primary TACACS
authentication server.
Use the undo primary authentication command to delete the configured
authentication server.
By default, IP address of TACACS authentication server is all zeros.
You are not allowed to assign the same IP address to both primary and secondary
authentication servers.
You can configure only one primary authentication server in a HWTACACS scheme. If
you repeatedly use this command, the latest configuration replaces the previous one.
You can remove an authentication server only when it is not being used by any active
TCP connections, and the removal impacts only packets forwarded afterwards.
Related command: display hwtacacs.
Example
# Configure a primary authentication server.
[3Com] hwtacacs scheme test1
[3Com-hwtacacs-test1] primary authentication 10.163.155.13 49
1.3.12 primary authorization
Syntax
primary authorization ip-address [ port ]
undo primary authorization
View
HWTACACS view
Parameter
ip-address: IP address of the server, a valid unicast address in dotted decimal format.
port: Port number of the server, which is in the range 1 to 65535 and defaults to 49.
Description
Use the primary authorization command to configure a primary TACACS
authorization server.