Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 AAA and RADIUS/HWTACACS Protocol
Configuration Commands
3Com Corporation
1-60
Use the undo primary authorization command to delete the configured primary
authorization server.
By default, IP address of TACACS authorization server is all zeros.
If TACACS authentication is configured for a user without TACACS authorization server,
the user cannot log in regardless of its user type.
You are not allowed to assign the same IP address to both primary and secondary
authorization servers.
You can configure only one primary authorization server in a HWTACACS scheme. If
you repeatedly use this command, the latest configuration replaces the previous one.
You can remove an authorization server only when it is not being used by any active
TCP connections, and the removal impacts only packets forwarded afterwards.
Related command: display hwtacacs.
Example
# Configure a primary authorization server.
[3Com] hwtacacs scheme test1
[3Com-hwtacacs-test1] primary authorization 10.163.155.13 49
1.3.13 reset hwtacacs statistics
Syntax
reset hwtacacs statistics { accounting | authentication | authorization | all }
View
User view
Parameter
accounting: Clears all the HWTACACS accounting statistics.
authentication: Clears all the HWTACACS authentication statistics.
authorization: Clears all the HWTACACS authorization statistics.
all: Clears all statistics.
Description
Use the reset hwtacacs statistics command to clear HWTACACS protocol statistics.
Related command: display hwtacacs.
Example
# Clear all HWTACACS protocol statistics.
<3Com> reset hwtacacs statistics