Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Portal Configuration Commands
3Com Corporation
2-9
Parameter
server-name: Name of a configured portal server.
Description
Use the portal command to enable portal authentication on an interface.
Use the undo portal command to disable portal authentication on an interface.
Before enabling portal authentication on an interface, make sure that the interface is
configured with a legal IP address, and the specified portal server exists.
Example
# Enable portal authentication on interface Ethernet0/0/0.
[3Com-Ethernet0/0/0] portal portal1
2.1.4 portal auth-network
Syntax
portal auth-network ip-address net-mask interface interface-type interface-num
undo portal auth-network { [ ip-address net-mask ] interface interface-type
interface-num | all }
View
System view
Parameter
ip-address: IP address of a network segment.
net-mask: Subnet mask of the network segment.
interface-type interface-num: Type and number of the Ethernet interface to which the
network segment is attached.
all: All configured authentication network segments.
Description
Use the portal auth-network command to configure a network segment for portal
authentication.
Use the undo portal auth-network command to remove a specified authentication
network segment or all authentication network segments.
By default, no authentication network segments are configured.
Example
# Configure the network segment for portal authentication.