Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 HWPing Commands
3Com Corporation
3-17
View
HWPing test group view
Parameter
ip-address: Source IP address used in the test.
Description
Use the source-ip command to configure a source IP address for this test.
Use the undo source-ip command to cancel the configuration.
The source IP address in this test defaults to the IP address of the interface where test
packets are to be sent.
Example
# Set the source IP address for this test to 169.254.10.2.
[Router-administrator-icmp] source-ip 169.254.10.2
3.1.24 source-port
Syntax
source-port port-number
undo source-port
View
HWPing test group view
Parameter
port-number: Source port number used in the test. It defaults to 0.
Description
Use the source-port command to configure a source port number for this test.
Use the undo source-port command to cancel the configuration.
Example
# Set the source port number to 8000 for this test.
[Router-administrator-icmp] source-port 8000
3.1.25 test-type
Syntax
test-type type