Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Portal Configuration Commands
3Com Corporation
2-16
Parameter
number: All-resource ID.
Description
Use the portal all-resource-id command to configure the all-resource ID.
Use the undo portal all-resource-id command to delete the all-resource ID.
By default, no all-resource ID is configured.
The all-resource ID is corresponding to the security ACL configured on the security
policy server for the router.
The security policy server issues the security ACL when an endpoint user using portal+
client passes security authentication. This security ACL must be the same as the
all-resource ID. With the all-resource ID, the user can access network resources other
than update resources.
Example
# Set the all-resource ID to 2.
[3Com] portal all-resource-id 2
# Delete the all-resource ID.
[3Com] undo portal all-resource-id
2.2.3 portal resource
Syntax
portal resource resource-name
undo portal resource
View
System view
Parameter
resource-name: Name of accessible resource.
Description
Use the portal resource command to create an accessible-resource name.
Use the undo portal resource command to restore the default accessible-resource
name.
The default accessible-resource name is huawei.