Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Portal Configuration Commands
3Com Corporation
2-17
This resource name is used by the system in the security authentication failure prompt
indicating that the resource with the specified name is accessible only after security
authentication is passed.
Example
# Create an accessible-resource name to sina.
[3Com] portal resource sina
# Restore the default accessible-resource name.
[3Com] undo portal resource
2.2.4 portal service-type
Syntax
portal service-type { normal | plus }
undo portal service-type
View
System view
Parameter
normal: Sets the portal authentication mode to normal (or portal).
plus: Sets the portal authentication mode to portal+.
Description
Use the portal service-type command to set the portal authentication mode.
Use the undo portal service-type command to restore the default portal
authentication mode.
After you enable portal on an interface, normal portal authentication mode applies by
default.
Portal+ is an enhancement to portal; it supports endpoint admission defense in addition
to the functions provided by portal.
Example
# Set the portal authentication mode to portal+.
[3Com] portal service-type plus
# Set the portal authentication mode to normal.
[3Com] undo portal service-type