Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Portal Configuration Commands
3Com Corporation
2-18
2.2.5 portal update-resource
Syntax
portal update-resource ip ip-address [ mask mask ]
undo portal update-resource { ip ip-address [ mask mask ] | all }
View
System view
Parameter
ip-address: IP address of update-resource.
mask: Dotted decimal subnet mask or mask length of the IP address of update
resource.
all: All update resources.
Description
Use the portal update-resource command to add an IP address to update resources.
Use the undo portal update-resource command to remove one or all IP addresses
from update resources.
By default, no update resources are configured.
EAD uses two authentication phases, identity authentication of AAA and security
authentication, to control resources accessible to an endpoint user using the portal+
client as follows:
z When the user passes identity authentication, it can access update resources, that
is, the resources in the isolation zone.
z When the user passes the subsequent security authentication, it can access all
available resources.
Example
# Add 192.168.0.201 to update resources.
[3Com] portal update-resource ip 192.168.0.201
# Remove 192.168.0.201 from update resources.
[3Com] undo portal update-resource ip 192.168.0.201
2.2.6 portal update-resource-id
Syntax
portal update-resource-id number
undo portal update-resource-id