Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Portal Configuration Commands
3Com Corporation
2-19
View
System view
Parameter
number: Update-resource ID.
Description
Use the portal update-resource-id command to configure the update-resource ID.
Use the undo portal update-resource-id command to delete the update-resource ID.
By default, the update-resource ID is not configured.
The update-resource ID is corresponding to the isolation ACL configured on the
security policy server for the router.
The security policy server issues the isolation ACL when an endpoint user using portal+
client passes identity authentication of AAA. If this isolation ACL is the same as the
update-resource ID, the user can access update resources. If this isolation ACL is not
the same as the update-resource ID, the router assigns the update-resource ID to the
user. By using this update-resource ID, the user can access update resources.
To access resources other than update resources, the user must pass the security
authentication.
Example
# Set the update-resource ID to 1.
[3Com] portal update-resource-id 1
# Delete the update-resource ID.
[3Com] undo portal resource-id
2.2.7 portal upload-ip
Syntax
portal upload-ip ip-address
undo portal upload-ip
View
Ethernet interface view
Parameter
ip-address: IP address of the interface connected to the CAMS.