Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 HWPing Commands
3Com Corporation
3-18
View
HWPing test group view
Parameter
test-type: Test type, which can be one of the following keywords:
z dhcp: DHCP test.
z dlsw: DLSw test.
z ftp: FTP connection test.
z http: HTTP connection test.
z icmp: ICMP test, the default test type.
z jitter: Jitter test for analyzing delay variations in UDP packet transmission.
z snmpquery: SNMP test.
z tcpprivate: Tests the TCP connection of a specified unknown port.
z tcppublic: Tests the TCP connection of port 7.
z udpprivate: Tests the UDP connection of a specified unknown port.
z udppublic: Tests the UDP connection of port 7.
Description
Use the test-type command to configure the type of the test.
HWPing tests include DHCP, DLSw, FTP, HTTP, ICMP, Jitter, SNMP, TCP, and UDP
tests.
The default test type is ICMP.
Example
# Set test type to ICMP.
[Router-administrator-icmp] test-type icmp
3.1.26 test-enable
Syntax
test-enable
View
HWPing test group view
Parameter
None
Description
Use the test-enable command to execute an HWPing test.