Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 2 Portal Configuration Commands
3Com Corporation
2-20
Description
Use the portal upload-ip command to configure the IP address of the interface
connected to the CAMS server.
Use the undo portal upload-ip command to delete the IP address of the interface
connected to the CAMS server.
By default, the IP address of the interface connected to the CAMS server is not
configured.
Use this command only on the Ethernet interface enabled with portal authentication.
Example
# Configure the IP address of the interface connected to the CAMS server.
[Router-Ethernet0/0/0] portal upload-ip 172.21.1.1
2.2.8 security-policy-server
Syntax
security-policy-server ip-address
undo security-policy-server [ ip-address | all ]
View
RADIUS scheme view
Parameter
ip-address: Specifies a security policy server by specifying its IP address.
all: All security policy servers.
Description
Use the security-policy-server command to specify the IP address of a security policy
server.
Use the undo security-policy-server command to delete the specified or all security
policy servers.
You may specify up to eight security policy servers in a RADIUS scheme.
Configured with the security-policy-server command, the RADIUS server accepts
only the session control packets (carrying the security ACL) issued by the specified
security policy server or servers after endpoints pass security authentication.
You need to configure this command only when RADIUS, portal, and security policy
servers are not co-located.