Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 3 Access Control List Configuration
Commands
3Com Corporation
3-2
3.1.2 display acl
Syntax
display acl { all | acl-number }
View
Any view
Parameter
all: All ACL rules.
acl-number: ACL expressed by number.
Description
Use the display acl command to view the rules of access control list.
The rule match order defaults to config or the configuration order. If it applies, the
display command does not show information on the match order. If the match order
auto applies, the display command shows that.
Example
# Display the contents of ACL 2000 rule.
[3Com] display acl 2000
Total ACL Number: 1
Basic ACL 2000, 2 rules,
Acl's step is 1
rule 1 permit (0 times matched)
rule 2 permit source 1.1.1.1 0 (0 times matched)
3.1.3 reset acl counter
Syntax
reset acl counter { all | acl-number }
View
User View
Parameter
acl-number: ACL expressed by number.
all: All ACL rules.
Description
Use the reset acl counter command to clear the statistics of access control list.