Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 HWPing Commands
3Com Corporation
3-20
3.1.28 timeout
Syntax
timeout time
undo timeout
View
HWPing test group view
Parameter
time: Timeout time in the range 1 to 60 seconds. It defaults to 3 seconds.
Description
Use the timeout command to configure a timeout time for a test.
Use the undo timeout command to restore the default.
Example
# Set the timeout time to 10 seconds.
[Router-administrator-icmp] timeout 10
3.1.29 tos
Syntax
tos value
undo tos
View
HWPing test group view
Parameter
value: ToS field in the header of HWPing test packets. It is in the range 0 to 255. By
default, ToS field is not set.
Description
Use the tos command to assign a value to the ToS field in the header of HWPing test
packets.
Use the undo tos command to cancel the ToS value configuration.
In a ping command, service type is set using the argument “-o”.