Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 3000 Router Series

1121

3Com Router 3000 Ethernet Family

Chapter 4 Firewall Configuration Commands

3Com Corporation

4-14

View

Any view

Parameter

verbose: Displays the detailed information of the sessions.

Description

Use the display aspf session command to view the information of the ASPF sessions.

Example

# Display information on current ASPF sessions.

[3Com] display aspf session

[Established Sessions]

Session Initiator Responder Application Status

212BA84 169.254.1.121:1427 169.254.1.52:0 ftp-data TCP_DOWN

2B738C4 169.254.1.121:1426 169.254.1.52:21 ftp FTP_CONXN_UP

# Display detailed information of current ASPF sessions.

[3Com] display aspf session verbose

[ Established Sessions ]

[ Session 0xC7E2B4 ]

(192.168.0.1:2125)=>(13.1.0.5:2093) h245-media-control H245_OPEN

SessNum: 229, TransProt: 6,

AppProt: 21

Prev: 0x0, Next: 0x0,

Child: 0xCA9EA4,

Parent: 0x0

SynNode: 0x0, FinNode: 0x0

Interface: Ethernet1/0/0,

Direction: outbound

Bytes/Packets sent (initiator:responder) [1339/15 : 1309/12]

Tcp SeqNum/AckNum [352115193/62885460 : 62885456/352115193]

Timeout 00:02:00(120),

Table 4-3 Information of current ASPF sessions

Item Description

TransProt: 6

Transport layer protocol is numbered 6,

which means that TCP is used.

AppProt: 21

Application layer protocol uses port 21,

which means that the sessions are FTP

sessions