Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-2
5.1.2 debugging ipsec
Syntax
debugging ipsec { all | sa | misc | packet [ policy policy-name [ seq-number ] |
parameters ip-address protocol spi-number ] }
undo debugging ipsec { all | sa | misc | packet [ policy policy-name [ seq-number ] |
parameters ip-address protocol spi-number ] }
View
User view
Parameter
all: Displays all debugging information.
sa: Displays debugging information of SA.
packet: Displays debugging information of IPSec packets.
policy policy-name: Displays debugging information of IPSec policy whose name is
policy-name.
seq-number: Displays debugging information of IPSec policy whose sequence number
is seq-number.
parameters: Displays debugging information of a SA whose remote address is
ip-address, Security protocol is protocol, and SPI is spi-number.
misc: Displays other debugging information of IPSec.
Description
Use the debugging ipsec command to turn IPSec debugging on.
Use the undo debugging ipsec command to turn IPSec debugging off.
By default, IPSec debugging is off.
Example
# Enable IPSec SA debugging function.
<3Com> debugging ipsec sa
5.1.3 display ipsec policy
Syntax
display ipsec policy [ brief | name policy-name [ seq-number ] ]
View
Any view