Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-6
name: Displays information of the ipsec policy template with the name template-name
and sequence number seq-number.
template-name: Name of an ipsec policy template.
seq-number: Sequence number of an ipsec policy template.
If no parameter is specified, then the detail information about all the ipsec policy
templates will be displayed. If name template-name is specified but seq-number is not,
the information of the specified IPSec policy template group is displayed.
Description
Use the display ipsec policy-template command to view information about the ipsec
policy template.
Parameter brief is for showing brief information about all the ipsec policy templates,
whose display format is the brief format (see the following example). It can display
information on all the ipsec policy templates quickly. Brief information includes:
template name and sequence number, access control list, and remote address.
Any of the sub-commands can be used to display detail information of the IPSec policy
template.
Related command: ipsec policy-template.
Example
# View brief information about all the ipsec policy templates.
[3Com] display ipsec policy-template brief
Policy-template-Name acl Remote-Address
------------------------------------------------------
test-tplt300 2200
Table 5-3 Brief information of IPSec policy template
Item Description
Policy-template-Name
name, sequence number of an ipsec
policy template
acl
access control list used by an ipsec
policy template
Remote Address remote IP address
5.1.5 display ipsec proposal
Syntax
display ipsec proposal [ proposal-name ]