Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide Chapter 3 HWPing Commands
3Com Corporation
3-24
Parameter
ip-address: IP address where HWPing Server provides the TCP listening service.
port-number: Port where HWPing Server provides the TCP listening service. This port
number cannot be greater than 50,000 or be one reserved for special purpose such as
1701.
Description
Use the hwping-server tcpconnect command to create a TCP listening service.
Use the undo hwping-server tcpconnect command to delete the established TCP
listening service.
When you use a Huawei router as the server in an HWPing test on the TCP connection
of a specified port, you must create the TCP listening service on the server.
Related command: hwping-server enable.
Example
# Create a TCP listening service, setting IP address to 169.254.10.2 and port number
to 9000.
[Router] hwping-server tcpconnect 169.254.10.2 9000
3.2.3 hwping-server udpecho
Syntax
hwping-server udpecho ip-address port-number
undo hwping-server udpecho ip-address port-number
View
System view
Parameter
ip-address: IP address where HWPing server provides the UDP listening service.
port-number: Port where HWPing Server provides the UDP listening service. This port
number must be smaller than 49,999 and could not be that of a port that is well-known
or has a special purpose, such as port 1701.
Description
Use the hwping-server udpecho command to create a UDP listening service.
Use the undo hwping-server udpecho command to delete the established UDP
listening service.