Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-39
proposal: ESP-ENCRYPT-3DES
proposal: ESP-AUTH-SHA1HMAC96
local address: 20.0.0.1
remote address: 20.0.0.2
sa remaining key duration (bytes/sec): 1887436532/2401
spi: 3024247997 (0xb4425cbd)
Uses Encrypt5/0/0
AH SAs
proposal: ESP-AUTH-SHA1HMAC96
local address: 20.0.0.1
remote address: 20.0.0.2
sa remaining key duration (bytes/sec): 1887436464/2401
spi: 2937733563 (0xaf1a41bb)
Uses Encrypt5/0/0
5.2.4 display encrypt-card statistics
Syntax
display encrypt-card statistics [ slot-id ]
View
Any view
Parameter
slot-id: Slot ID for the encryption card, whose range depends on the number of slots on
the router. It is in 3-dimentional format, for example, x/y/z, where x stands for slot ID on
the router, y and z are fixed to 0 for the encryption card.
Description
Use the display encrypt-card statistics command to view statistics on the specified
or all encryption cards.
The statistics includes the processing information of ESP/AH packets on the encryption
card. More details are displayed in the following example.
If the slot ID you type in is greater than the available slot number on the router, the error
information “Invalid encrypt-card slot-id” will be prompted.
Related command: reset encrypt-card statistic.
Example
# Display the statistics on the encryption card at slot 5/0/0.
[Router] display encrypt-card statistics 5/0/0