Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-40
Encrypt5/0/0 security packets statistics :
input/output security packets: 8/4
input/output security bytes: 1472/604
dropped security packet detail:
no enough memory: 0
can't find SA: 0
queue is full: 0
authentication is failed: 0
wrong length: 0
replay packet: 0
too long packet: 0
wrong SA: 0
invalid proposal: 0
invalid protocol: 0
buffer error: 0
wrap error: 0
crypto error: 0
pad error: 0
5.2.5 display encrypt-card syslog
Syntax
display encrypt-card syslog [ slot-id ]
View
Any view
Parameter
slot-id: Slot ID for the encryption card, whose range depends on the number of slots on
the router. If no slot is specified, information on all encryption cards is displayed. Slot
numbers are represented by x/y/z, where x is the slot number, and y and z are zero for
encryption cards.
Description
Use the display encrypt-card syslog command to view the current system log on the
encryption cards.
If the slot ID you type in is greater than the available slot number on the router, the error
information “Invalid encrypt-card slot-id” shall be prompted.
Related command: encrypt-card set syslog.
Example
# Display the system log on the encryption card at slot 5/0/0.