Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-41
[Router] display encrypt-card syslog 5/0/0
Date: 2004-03-27, Time: 11:45 Encrypt5/0/0 : receive time config cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive add tdb cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive add tdb cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive link tdb cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive add tdb cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive add tdb cmd.
Date: 2004-03-27, Time: 11:50 Encrypt5/0/0 : receive link tdb cmd.
5.2.6 display interface encrypt
Syntax
display interface encrypt [ slot-id ]
View
Any view
Parameter
slot-id: Slot ID for the encryption card, whose range depends on the slot number on the
router. It is in 3-dimentional format, for example, x/y/z, where x stands for slot ID on the
router, y and z are fixed to 0 for the encryption card.
Description
Use the display interface encrypt command to view information about interfaces on
the specified or all encryption cards.
With this command, you can view the status of the encryption card, total countnumber
of packets transmitted or received on it, maximum countnumber of packets dropped per
second, information during the last five seconds.
Related command: interface encrypt.
Example
# Display the port information on the encryption card at slot 5/0/0.
[Router] display interface Encrypt 5/0/0
Description : Encrypt5/0/0 Interface
Protocol Status: READY
Driver Status : READY
Total Statistics
Packets sent to card : 10
Packets received from card : 9
Bytes sent to card : 1216
Bytes received from card : 584