Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-42
Dropped packets : 0
Statistics during last 5 seconds
Packets sent to card : 0
Packets received from card : 0
Bytes sent to card : 0
Bytes received from card : 0
Dropped packets : 0
5.2.7 encrypt-card backuped
Syntax
encrypt-card backuped
undo encrypt-card backuped
View
System view
Parameter
None
Description
Use the encrypt-card backuped command to enable backup function for the
encryption card.
Use the undo encrypt-card backuped command to disable backup function for the
encryption card.
By default, backup function for the encryption card is disabled.
For the IPSec SA implemented by the encryption card, if the card is normal, IPSec is
processed by the card. If the card fails, backup function is enabled on the card and the
selected encryption/authentication algorithms for the SA are supported by the IPSec
module on VRP platform, IPSec shall be implemented by the IPSec module on VRP
platform. In the event that the selected algorithms are not supported by the IPSec
module, the system drops packets.
Example
# Enable backup function for the encryption card.
[Router] encrypt-card backuped
5.2.8 encrypt-card fast-switch
Syntax
encrypt-card fast-switch