Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-44
In encryption card interface view, you only can the shutdown and undo shutdown
commands, respectively to shut down the encryption card or turn the card up.
Example
# Enter the interface mode of the encryption card at slot 5/0/0.
[Router] interface encrypt 5/0/0
[Router-Encrypt5/0/0]
5.2.10 ipsec card-proposal
Syntax
ipsec card-proposal proposal-name
undo ipsec card-proposal proposal-name
View
System view
Parameter
proposal-name: Name of the SA proposal of the encryption card, a string up to 32
characters. It is case-sensitive.
Description
Use the ipsec card-proposal command to create an SA proposal for the encryption
card and enter the corresponding view.
Use the undo ipsec card-proposal command to delete an SA proposal of the
encryption card.
This command is used in encryption card SA proposal view (the corresponding
encryption/decryption/authentication are implemented on the encryption card),
whereas the host software is also compatible with SA proposal view of the host itself
(the ipsec proposal command), in which the encryption/decryption/authentication are
implemented by the host. In encryption card SA proposal view, you can also specify the
slot ID of the encryption card for the SA proposal, with the use encrypt card command,
while other configurations are identical with the ipsec proposal command.
After completing SA proposal configuration, you need to return to system view using the
quit command, so that you can initiate other configuration.
Example
# Create the SA proposal “card” using the encryption card at slot 5/0/0, configure
security and encryption algorithm.
[Router] ipsec card-proposal card
[Router-ipsec-card-proposal] use encrypt-card 5/0/0