Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-45
[Router-ipsec-card-proposal-card] transform ah-esp
[Router-ipsec-card-proposal-card] ah authentication-algorithm sha1
[Router-ipsec-card-proposal-card] esp authentication-algorithm sha1
[Router-ipsec-card-proposal-card] esp encryption-algorithm 3des
[Router-ipsec-card-proposal-card] quit
[Router]
5.2.11 reset counters encrypt
Syntax
reset counters interface encrypt [ slot-id ]
View
User view
Parameter
slot-id: Slot ID for the encryption card, whose range depends on the slot number on the
router. It is in 3-dimentional format, for example, x/y/z, where x stands for slot ID on the
router, y and z are fixed to 0 for the encryption card.
Description
Use the reset counters interface encrypt command to clear the statistics on the
encryption card.
The statistics record all the information starting from normal operation of the encryption
card, while system debugging requires statistics of a specific time period for fault
analysis. Then you may need to reset the existing statistics and get the statistics of a
required time period.
Related command: ipsec card-proposal and display encrypt-card sa.
Example
# Clear the statistics on the encryption card on the slot 5/0/0.
<Router> reset counters encrypt-card 5/0/0
5.2.12 reset encrypt-card sa
Syntax
reset encrypt-card sa [ slot-id ]
View
User view
Parameter