Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-46
slot-id: Slot ID for the encryption card, whose range depends on the slot number on the
router. It is in 3-dimentional format, for example, x/y/z, where x stands for slot ID on the
router, y and z are fixed to 0 for the encryption card.
Description
Use the reset encrypt-card sa command to clear the SAs on the encryption card.
You may need to clear the SA database information stored on the encryption card, to
output only the required information during debugging.
Related command: ipsec card-proposal and display encrypt-card sa.
Example
# Clear the SAs on the encryption card on the slot 5/0/0.
<Router> reset encrypt-card sa 5/0/0
5.2.13 reset encrypt-card statistics
Syntax
reset encrypt-card statistics [ slot-id ]
View
User view
Parameter
slot-id: Slot ID for the encryption card, whose range depends on the slot number on the
router. It is in 3-dimentional format, for example, x/y/z, where x stands for slot ID on the
router, y and z are fixed to 0 for the encryption card.
Description
Use the reset encrypt-card statistics command to clear the statistics during
processing of the encryption card.
The statistics record all the protocol processing information from the last rebooting,
including counts of incoming/outgoing ESP/AH packets, dropped packets, failed
authentications, erroneous SAs, invalid SA proposals, invalid protocols.
Related command: display encrypt-card statistic.
Example
# Clear the processing statistics on the encryption card on the slot 5/0/0.
<Router> reset encrypt-card statistic 5/0/0
5.2.14 reset encrypt-card syslog