Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-48
Use the undo snmp-agent trap enable encrypt-card command to disable SNMP
agent trap function on the card.
When combined with appropriate NM configuration, the trap function allows you to view
information about card reboot, state transition and packet loss processing on the
Console of the NM station or router.
Example
# Enable the trap function on the encryption card.
[Router] snmp-agent trap enable encrypt-card
5.2.16 use encrypt-card
Syntax
use encrypt-card [ slot-id ]
undo use encrypt-card [ slot-id ]
View
Card SA proposal view
Parameter
slot-id: Slot ID for the encryption card, whose range depends on the slot number on the
router. It is in 3-dimentional format, for example, x/y/z, where x stands for slot ID on the
router, y and z are fixed to 0 for the encryption card.
Description
Use the use encrypt-card command to specify the SA proposal uses the encryption
card at a designated slot.
Use the undo use encrypt-card command to remove the configuration.
One SA proposal can only be processed by a single encryption card, but one single
encryption card can process different SA proposals.
Related command: ipsec card-proposal.
Example
# Configure the slot holding the encryption card used by the encryption card SA
proposal named card.
[Router] ipsec card-proposal card
[Router-ipsec-card-proposal] use encrypt-card 5/0/0