Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-49
5.3 IPSec DPD Configuration Commands
5.3.1 debugging ike dpd
Syntax
debugging ike dpd
undo debugging ike dpd
View
User view
Parameter
None
Description
Use the debugging ike dpd command to enable IKE DPD debugging.
Use the undo debugging ike dpd command to disable IKE DPD debugging.
The following table describes the fields of the debugging ike dpd command.
Table 5-9 Description on the fields of the debugging ike dpd command
Field Description
Peername Name of the IKE peer
type
Two options are available:
Response, indicating that the IKE peer is
the receiver of a DPD query
Request: indicating that the IKE peer is
the sender of a DPD query
action
Types of actions:
recv dpd request, meaning a DPD query
is received.
send dpd response, meaning a DPD
response is sent.
send dpd request, meaning a DPD
query is sent.
recv dpd response, meaning a DPD
response is received.
seqno Sequence number of a DPD query
Example
# Enable IKE DPD debugging.