Command Reference Guide

ManualsBrandsHP ManualsRoutersHP 3000 Router Series

1171

3Com Router 3000 Ethernet Family

Chapter 5 IPSec Configuration Commands

3Com Corporation

5-50

<3Com> debugging ike dpd

peer1 RESPONSE(recv dpd request): received a message (seqno:1249119552)

peer1 RESPONSE(send dpd response): send a message (seqno:1249119552)

peer1 REQUEST(send dpd request): send a message (seqno:1249119550)

peer1 REQUEST(recv dpd response): received a message (seqno:1249119550)

5.3.2 display ike dpd

Syntax

display ike dpd [ dpd-name ]

View

Any view

Parameter

dpd-name: DPD structure name.

Description

Use the display ike dpd command to display the configuration of the specified or all

DPD structures about reference count, interval-time, and time_out.

Example

# Display information about all the configured DPD structures.

[3Com] display ike dpd

---------------------------

IKE dpd: aaa

references: 0

interval-time: 10

time_out: 5

---------------------------

IKE dpd: xhy

references: 1

interval-time: 10

time_out: 5

Table 5-10 Description on the fields of the display ike dpd command

Field Description

IKE dpd IKE DPD structure name

references DPD structure reference count

interval-time Interval for triggering DPD queries