Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 5 IPSec Configuration Commands
3Com Corporation
5-52
Parameter
dpd-name: Name of dead peer detection (DPD) structure.
Description
Use the ike dpd command to create a DPD structure and enter its view.
Use the undo ike dpd command to delete the specified DPD structure.
If a DPD structure has been referenced by an IKE peer, it cannot be deleted.
Related command: dpd.
Example
# Create a DPD structure named aaa.
[3Com] ike dpd aaa
# Delete the DPD structure named aaa.
[3Com] undo ike dpd aaa
5.3.5 interval-time
Syntax
interval-time seconds
undo interval-time
View
DPD structure view
Parameter
seconds: Interval for triggering DPD queries, in the range 1 to 300 seconds. It defaults
to 10 seconds.
Description
Use the interval-time command to configure the interval for triggering DPD query.
Use the undo interval-time command to restore the default.
Example
# Set interval-time to 20 seconds.
[3Com-ike-dpd-aaa] interval-time 20
# Reset interval-time to 10 seconds.
[3Com-ike-dpd-aaa]undo interval-time