Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 6 IKE Configuration Commands
3Com Corporation
6-2
Parameter
pre-share: Specifies the pre-shared key authentication as the Internet Key Exchange
(IKE) proposal authentication method.
rsa-signature: specifies to authenticate through PKI digital signature.
Description
Use the authentication-method command to select the authentication method used
by an IKE proposal.
Use the undo authentication-method command to restore the authentication method
used by an IKE proposal to the default.
By default, the authentication method used by an IKE proposal is pre-shared key
authentication.
You can specify an authentication method for an IKE policy. So far, two methods are
available: pre-shared key and PKI (rsa-signature).
Authentication key must be configured to adopt the pre-shared key authentication
method.
Related command: ike pre-shared-key, ike proposal, display ike proposal, pki
domain, and pki entity.
 Note:
For more information on configuring PKI, refer to “PKI Configuration” in this manual.
Example
# Specify pre-shared key authentication as the authentication method for IKE proposal
10.
[3Com] ike proposal 10
[3Com-ike-proposal-10] authentication-method pre-share
6.1.3 debugging ike
Syntax
debugging ike { all | error | exchange | message | misc | transport}
undo debugging ike { all | error | exchange | message | misc | transport}
View
User view