Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 6 IKE Configuration Commands
3Com Corporation
6-11
Example
# Set name as the ID used in IKE negotiation.
[Router] ike peer new_peer
[Router-ike-peer-new_peer] id-type name
6.1.11 ike next-payload check disabled
Syntax
ike next-payload check disabled
undo ike next-payload check disabled
View
System view
Parameter
None
Description
Use the ike next-payload check disabled command to disable the router to check the
next-payload field in the last payload of the IKE negotiation packet during IPSec
negotiation for compatibility with other vendors.
Use the undo ike next-payload check disabled command to restore the default,
checking the next payload field.
An IKE negotiation packet comprises multiple payloads; the next-payload field is in the
generic header of the last payload. According to the protocol, this field should be set to
0. It however may vary by vendor. For compatibility sake, you can use the ike
next-payload check disabled command to ignore this field during IPSec negotiation.
Example
# Disable the router to check the next-payload field in the last payload of the IKE
negotiation packet during IPSec negotiation.
[Router] ike next-payload check disabled
6.1.12 ike local-name
Syntax
ike local-name name
undo ike local-name