Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 6 IKE Configuration Commands
3Com Corporation
6-19
[Router] ike peer new_peer
[Router-ike-peer-new_peer] nat traversal
6.1.22 pre-shared-key
Syntax
pre-shared-key key
undo pre-shared-key
View
IKE-peer view
Parameter
key: Specifies a pre-shared key, which is a string of 1 to 128 characters.
Description
Use the pre-shared-key command to configure a pre-shared key to be used in IKE
negotiation.
Use the undo pre-shared-key command to remove the pre-shared key used in IKE
negotiation.
Example
# Set the pre-shared key used in IKE negotiation to “abcde”.
[Router] ike peer new_peer
[Router-ike-peer-new_peer] pre-shared-key abcde
6.1.23 peer
Syntax
peer { multi-subnet | single-subnet }
undo peer
View
IKE-peer view
Parameter
multi-subnet: Sets the subnet type to multiple.
single-subnet: Sets the subnet type to single.
Description
Use the peer command to configure the subnet type in IKE negotiation.