Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 7 PKI Configuration Commands
3Com Corporation
7-8
Parameter
name: PKI domain name specified for the quotation of other commands, indicating the
PKI domain to which this device belongs. It can contain 1 to 15 characters.
Description
Use the pki domain command to enter PKI domain view, and configure the parameters
of LDAP server and for certificate request and authentication.
Use the undo pki domain command to delete the specified PKI domain.
By default, no PKI domain name is specified.
Example
# Enter PKI domain view
[RouterCA] pki domain 1
[RouterCA-pki-domain-1]
7.1.12 root-certificate fingerprint
Syntax
root-certificate fingerprint { md5 | sha1 } string
undo root-certificate fingerprint
View
PKI domain view
Parameter
md5: Specifies to use an MD5 fingerprint.
sha1: Specifies to use an SHA1 fingerprint.
string: Fingerprint to be used. For an MD5 fingerprint, it must consist of 32 characters
and be entered in hexadecimal format. For an SHA1 fingerprint, it must consist of 40
characters and be entered in hexadecimal format.
Description
Use the root-certificate fingerprint command to configure the fingerprint for
authenticating the CA root certificate.
Use the undo root-certificate fingerprint command to delete the fingerprint for
authenticating the CA root certificate.
By default, no fingerprint is configured for authenticating the CA root certificate.
Example
# Configure an MD5 fingerprint for authenticating the CA root certificate.