Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 7 PKI Configuration Commands
3Com Corporation
7-18
[RouterCA] pki validate-certificate domain 1
7.4 PKI Displaying and Debugging Commands
7.4.1 debugging pki
Syntax
debugging pki { all | request | retrieval | verify | error }
undo debugging pki { all | request | retrieval | verify | error }
View
Any view
Parameter
all: debugging in all the processes;
request: debugging in certificate request;
retrieval: debugging in certificate retrieval;
verify: debugging in certification validation;
error: debugging in error cases
Description
Use the debugging pki command to enable PKI debugging functions.
Use the undo debugging pki command to disable PKI debugging functions.
Unexpected problems do occur during the device operation. Debugging commands
enable the optional output and print of debugging information, facilitating the network
monitor and fault diagnosis for the network operators and developers.
By default, all PKI debugging functions are disabled.
Example
# Enable the debugging function related to errors in PKI certificate operation
[RouterCA] debugging pki error
[RouterCA] pki delete-certificate ca domain 1
[RouterCA] pki request-certificate domain 1
Certificate enroll failed!
Cannot get the CA/RA certificate when creating the x509 Request
# Enable the debugging function for PKI certificate retrieval
[RouterCA] debugging pki retrieval
[RouterCA] pki retrieval certificate local domain 1
Retrievaling CA/RA certificates. Please wait a while......
We receive 3 certificates.