Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 L2TP Configuration Commands
3Com Corporation
1-3
Example
# Enable all L2TP debugging.
<Quidway> debugging l2tp all
1.1.3 display l2tp session
Syntax
display l2tp session
View
Any view
Parameter
None
Description
Use the display l2tp session command to view the current L2TP sessions.
The output information of the command facilitates the user to learn information of the
current L2TP sessions.
Related command: display l2tp tunnel.
Example
# Display current L2TP sessions.
<Quidway> display l2tp session
LocalSID RemoteSID LocalTID Idle-Time-Left
1 1 2 600
Table 1-1 Description on the fields of the display L2tp session command
Field Description
Total session Number of sessions
LocalSID
The number uniquely identifies the local
session.
RemoteSID
The number uniquely identifies the peer
session.
LocalTID The local ID number of the tunnel
Idle-Time-Left
The residual time before the session is
disconnected