Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 L2TP Configuration Commands
3Com Corporation
1-4
1.1.4 display l2tp tunnel
Syntax
display l2tp tunnel
View
Any view
Parameter
None
Description
Use the display l2tp tunnel command to view information of the current L2TP tunnels.
The output information of the command facilitates the user to learn information of the
current L2TP tunnels.
Related command: display l2tp session.
Example
# Display information of the current L2TP tunnels.
<Quidway> display l2tp tunnel
LocalTID RemoteTID RemoteAddress Port Sessions RemoteName keepstand
2 22849 11.1.1.1 1701 1 lns YES
Total tunnel = 1
Table 1-2 Description on the fields of the display L2tp tunnel command
Field Description
Total tunnels Number of tunnels
LocalTID
The number uniquely identifies the local
tunnel
RemoteTID
The number uniquely identifies the peer
tunnel
Remote Name Name of the peer end
RemoteAddress IP address of the peer end
Port Port number of the peer end
Sessions Number of sessions on the tunnel
Remote Name Name of the peer
KeepStand State of the tunnel-hold function