Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 L2TP Configuration Commands
3Com Corporation
1-6
System view
Parameter
virtual-template-number: Number of a virtual template, an integer in the range 0 to
1023.
Description
Use the interface virtual-template command to create a virtual template.
Use the undo interface virtual-template command to delete the virtual template.
By default, no virtual template is created.
Virtual templates are mainly used to configure parameters of the virtual interfaces
dynamically created by the router in operation, such as MP interfaces (bundled logical
interfaces) and L2TP logical interfaces.
Related command: allow l2tp.
Example
# Create virtual template 1 and enter its view.
[Quidway] interface virtual-template 1
1.1.7 l2tp-auto-client enable
Syntax
l2tp-auto-client enable
undo l2tp-auto-client enable
View
Virtual template interface view
Parameter
None
Description
Use the l2tp-auto-client enable command to enable the LAC client to set up L2TP
tunnel.
Use the undo l2tp-auto-client enable command to disable the LAC client to set up
L2TP tunnel.
Example
# Enter virtual template interface view.
[Quidway] interface virtual-template 1