Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 L2TP Configuration Commands
3Com Corporation
1-7
# Enable the LAC client to set up L2TP tunnel.
[Quidway-Virtual-Template1] l2tp-auto-client enable
1.1.8 l2tp enable
Syntax
l2tp enable
undo l2tp enable
View
System view
Parameter
None
Description
Use the l2tp enable command to enable the L2TP function.
Use the undo l2tp enable command to disable the L2TP function.
By default, the L2TP function is disabled.
This command and its undo form are used to enable and disable the L2TP function.
Only when this function is enabled, can the L2TP service be implemented.
Related command: l2tp-group.
Example
# Enable the L2TP function on the router.
[Quidway] l2tp enable
1.1.9 l2tpmoreexam enable
Syntax
l2tpmoreexam enable
undo l2tpmoreexam enable
View
System view
Parameter
None