Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 L2TP Configuration Commands
3Com Corporation
1-8
Description
This command serves the LNS side of L2TP.
Use the l2tpmoreexam enable command to enable the multi-instance function of
L2TP.
Use the undo l2tpmoreexam enable command to disable the function.
By default, L2TP multi-instance function is disabled.
Only after the multi-instance function is enabled, can the service be deployed.
Related command: l2tp enable.
Example
# Enable the multi-instance function at the LNS side.
[Quidway] l2tpmoreexam enable
1.1.10 l2tp-group
Syntax
l2tp-group group-number
undo l2tp-group group-number
View
System view
Parameter
group-number: Number of L2TP group, an integer ranging from 1 to 1000.
Description
Use the l2tp-group command to create an L2TP group.
Use the undo l2tp-group command to delete the L2TP group.
By default, no L2TP group is created.
Deleting an L2TP group using the undo l2tp-group command will also delete its all
configuration information. (L2TP group 1 can be the default L2TP group).
Related command: allow l2tp and start l2tp.
Example
# Create L2TP group 2 and enter L2TP group 2 view.
[Quidway] l2tp-group 2
[Quidway-l2tp2]