Command Reference Guide

3Com Router 3000 Ethernet Family
Command Reference Guide
Chapter 1 L2TP Configuration Commands
3Com Corporation
1-12
Related command: reset l2tp tunnel, reset l2tp session.
Example
# Disconnect the current L2TP user.
<Quidway> reset l2tp user quidway@h3c
1.1.16 session idle-time
Syntax
session idle-time time
undo session idle-time
View
L2TP group view
Parameter
time: Timeout period in the range 0 to 10000 seconds. It defaults to 0, meaning the
session never expires.
Description
Use the session idle-time command to set the L2TP session idle-timeout timer. Upon
expiration of this timer, the L2TP session is disconnected.
Use the undo session idle-time command to disable the idle-timeout timer.
By default, the 2TP session never expires.
Example
# Enter L2TP group view.
[Quidway] l2tp-group 1
# Set the L2TP session idle-timeout timer to 600 seconds.
[Quidway] session idle-time 600
1.1.17 start l2tp
Syntax
start l2tp { ip ip-addr [ ip ip-addr ] [ ip ip-addr ] ... } { domain domain-name |
fullusername user-name }
undo start
View
L2TP group view